Skip to Content

Meralco Rate Up P0.49/kWh in November to P15.55 on Peso, LNG

Meralco raised its November rate by P0.4895/kWh to P15.5510 for a typical household, about P98 more for 200 kWh. See what drove it and what it means for builders.
November 16, 2026 by
Meralco Rate Up P0.49/kWh in November to P15.55 on Peso, LNG
Blocktec

By the Blocktec Editorial Team

Meralco announced on November 13, 2026 that its November rate rises by P0.4895 per kilowatt-hour (kWh). The overall rate for a typical household is now P15.5510 per kWh, up from P15.0615 in October. For a home using 200 kWh, that works out to roughly P98 more on the monthly bill.

The increase comes mainly from higher costs at Meralco's power suppliers, driven by the weak peso, pricier imported liquefied natural gas (LNG) and a jump in Luzon power demand during a hot October.

Where The Increase Came From

The biggest driver is the generation charge, which rose P0.4344 per kWh. Meralco said this came mostly from higher supplier costs, tied to the peso's depreciation and the Middle East crisis.

Three parts of the generation charge moved in different directions:

  • First Gas and Prime CoreGen: charges rose P2.9241 per kWh. The quarterly repricing of Malampaya gas and costlier imported LNG pushed them up. Because Malampaya supply is limited, the plants raised LNG from 24% to 44% of their fuel. About 86% of their costs are in US dollars, so a weaker peso adds directly to what Meralco pays.
  • Spot market (WESM): charges jumped P4.3946 per kWh. Average Luzon demand rose by about 769 MW in October, which Meralco said was warmer than October 2024, the last El Niño episode. When many aircons and fans run at once, spot prices climb.
  • Power supply agreements (PSAs): charges fell P0.2769 per kWh because these plants were dispatched more. PSAs supplied about 73% of Meralco's needs, First Gas and Prime CoreGen about 24%, and the spot market about 3%.

The spot market supplied only 3% of the mix, yet its price swing was large. The share is small, but the price jump was big enough to show up in the generation charge.

Taxes, Grid Charges And Refunds

Taxes and other pass-through charges rose a net P0.2165 per kWh. Meralco said less use of VAT-exempt local gas meant higher taxes on the power mix.

Grid charges rose a net P0.0080 per kWh. Two items offset each other here:

  • Transmission went up P0.1721 per kWh after regulators approved a higher allowable revenue for NGCP, the grid operator.
  • Ancillary charges fell P0.1641 per kWh after the Reserve Market was suspended on October 14.

New distribution tariffs added P0.0096 per kWh.

Refunds soften the blow. A new refund approved by the Energy Regulatory Commission (ERC) cuts residential rates by P0.1733 per kWh for six months. Two older refunds together total P1.0139 per kWh.

Payment Deadlines And Disconnection Relief

Meralco suspended disconnection until December for users consuming 200 kWh or less per month, provided they pay their unpaid May-July bills by November 26. Bills for August to October are due by December 26. Households in that bracket who settle on time keep their service while they catch up.

What Comes Next

The November rate reflects October conditions, so the peso, LNG prices, Malampaya supply and Luzon demand will keep shaping the next adjustments. The new refund continues for six months, which gives some cushion, but the older refunds and the generation costs will determine how bills move after that. Households and businesses should watch the monthly announcement rather than assume this level holds.

What The Rate Hike Means For Builders And Homeowners

A P98 monthly increase for a 200-kWh home may look small, but aircon and fan use is exactly what grows in hot months, and larger homes, offices and commercial spaces feel it more. Electricity is a running cost of every building, and a wall that lets in less heat helps lower it.

This is where wall spec matters. Walls on the west and east sides take the most afternoon sun, and the heat that passes through them is what your aircon has to remove. AAC blocks have a thermal conductivity of about 0.16 W/mK, so less heat gets through compared with a dense wall. Cooler rooms mean the aircon cycles less, which is a saving you collect every month, not just once.

For developers and homeowners comparing options, look at both sides: the upfront wall cost and the power bill over the years. In Blocktec's cost comparison, the wall system came out with up to about 21% savings versus hollow blocks, depending on the project. Blocks are laid with thin-bed adhesive and finished with skimcoat, so it is walang palitada, which also helps the schedule. Combine that with lower cooling loads and the savings show up in two places.

When you plan your next project, ask your designer to review the orientation of exposed walls and the cooling load, not just the wall price per square meter.

Sources

Planning a build or renovation and want to cut cooling costs? Send your wall area or blueprints to sales@blocktec.ph or visit blocktec.ph for a free AAC wall-system estimate.

in News
Meralco Rate Up P0.49/kWh in November to P15.55 on Peso, LNG
Blocktec November 16, 2026
Share this post
Our blogs
Archive