Blocktec AAC Wall Panel (Single Mesh)

Blocktec AAC Wall Panels provide a solid foundation for modular, rapid, efficient, and environmentally friendly building solutions that surpass the performance of traditional construction materials

✅ No more palitada

✅ Excellent thermal insulation

✅ Noise cancelling

✅ Lower labor cost

✅ Faster installation

✅ Lightweight

₱ 4,137.00 4137.0 PHP ₱ 4,137.00 Tax Included

Thickness
- 100mm + ₱ 932.00
- 150mm + ₱ 2,888.00
- 75mm

This combination does not exist.

Add to cart Buy now

AAC Wall Panel

Terms and Conditions

Benefits

Build Faster & Stronger

No plastering, no drying, less columns, ease & speed

in construction time

Cost-Efficient

Less wastage & more than 25% savings vs CHB

4-Hour Fire Rating

Up to 4 hours Fire Resistance Period (FRP) which

means more safety for your family and property

Lightweight, Less Dead Load

More savings on steel, cement and lesser dead

load of the building

Higher Noise Reduction

Reduces noise from external sources giving

you more peace and quietness

Cooler Space

Very low coefficient of thermal conductivity which creates a cooling effect and saves electricity for air conditioning

Excellent Water Resilient

Provides superior resistance to moisture

penetration than concrete hollow blocks

Environment-Friendly

Blocktec AAC blocks & panels are non-toxic, reusable,

renewable and recyclable

Technical Specifications

Applications	Fire Wall, Interior Wall, Exterior Wall, Perimeter Wall
Compressive Strength	508~580psi
Length x Height	3000mm x 600mm
Thickness	100mm, 150mm
Weight	75mm- 95kg, 100mm- 130kg, 150mm- 200kg
Nominal Density	550-650 kg/m3
Shrinkage	0.02%
Thermal Conductivity	0.16 - 0.26 w/mK
Fire Resistance Period	4 Hours
Sound Transmission Class	-44DB
Ingredients	Calcium Silicate, Crystalline Silica/ Quartz, Portland Cement, Lime, Anti-Corrosive/ Additives

Disclaimer:

Please be aware that the technical specifications of our Autoclaved Aerated Concrete (AAC) products are subject to change. The precise specifications, including but not limited to density, compressive strength, and thermal conductivity, may vary based on the specific product model, type, and manufacturing batch. While we strive to provide accurate and current information, ongoing product development and quality improvements may lead to variations. We recommend confirming the exact specifications for your intended product with your sales representative or by referring to the product's official data sheet at the time of purchase. The final specifications are those of the product delivered.

Download Product Guide

Installation Methodology

The installation of autoclaved aerated concrete (AAC) wall panel involves the following steps:

Receive the panels: Inspect and unload the panels, ensuring they are kept dry.
Locate and install the locator: Clean the floor and use chalk lines and a laser level to mark the panel positions. Set up a positioning frame.
Prepare the panels: Install support brackets, cut panel belts, and classify the panels. Cut panels as needed, using water to reduce dust.
Transport and initial installation: Transport the panels to the location. Apply thin-bed mortar and install the first panel using an installing machine.
Align and fix: Use wooden wedges and a level to align the panel, then fix it with wedges and screws.
Install subsequent panels: Apply thin-bed mortar to the tongue of the installed panel and repeat the installation process for the remaining panels.
Install lintel and finish: Install the lintel with formwork and concrete. Finish the surface and perform an internal inspection before the final handover.

Accessories: Rubber mallet, carbide saw, dowel bar(8inches, 10mm diameter), AAC Adhesives, cement, leveling bar, drill mixer, trowel

Watch our videos for more specific details.